Join our mailing list!





  Home > DODGE / RAM > QUAD CAB >

DODGE QUAD & CREW CAB 2-12" VENTED
DODGE QUAD & CREW CAB 2-12" VENTED


 
Alternative Views:



DQC-212-V

2002-2018 RAM QUAD & CREW CAB
WILL NO FIT IN THE MEGA CAB!
2-12" VENTED SUB BOX

10" ADAPTER RINGS AVAILABLE

AIR VOLUME: 1.55 CUBIC FEET PER SIDE
DIVIDED: YES
PORT/VENT TUNE FREQUENCY: 35 Hz
MAX FRAME SIZE: 13" Round subs only
MOUNTING HOLE SIZE: 11.125"
MOUNTING DEPTH: 7.25"
WITH A 6.5" DIAMETER MAGNET

STANDARD TERMINAL CUPS ARE INCLUDED "SEE PICTURE"
FINISH AND COLOR: SPRAY COATED WITH BLACK LINE-X BED LINER

THIS IS THE ULTIMATE SUB BOX FOR DODGE RAM QUAD AND CREW CAB TRUCKS.
IT IS PORTED SO IT WILL PLAY LOW DEEP BASS WHILE THE 1.55 CUBIC FEET WILL KEEP THE SUB SNAPPY AND TIGHT FOR CLEAN HARD HITTING BASS. "THE BEST OF BOTH WORLDS"
OUR MOUNTING DEPTH AND MAGNET SIZE IS LISTED SLIGHTLY SMALLER THAN IT ACTUALLY IS TO BE ON THE SAFE SIDE.
SUBS WITH LARGE BULKY CAST FRAMES MAY NOT FIT.
WE RECOMMEND PURCHASING THE SUB BOX FIRST AND BRINGING IT TO THE STEREO SHOP TO CHECK THE FIT OF LARGE SUBS.

THE SUB BOX IS SHIPPED IN TWO PACKAGES. THE UPPER PORTION OF THE BOX IS IN ONE PACKAGE AND THE TWO MOLDED PODS, SPACERS, INSTRUCTION SHEET AND SCREWS ARE IN THE OTHER PACKAGE. THE PODS SIMPLY SCREW TO THE BOTTOM OF THE BOX.
YOU CAN USE SILICONE OR CAULK WHEN PUTTING THEM TOGETHER BUT IT IS NOT NECESSARY AND IS NOT INCLUDED.
4- 5/8" SEAT SPACERS ARE INCLUDED AND ARE REQUIRED FOR THIS BOX TO FIT.

THE FRONT EDGE OF THE SEAT WILL SIT ABOUT 1/2" HIGHER THAN IT DID FROM THE FACTORY WHICH IS NOT NOTICEABLE.


THE FOLD OUT PLATFORM AND STORAGE LIDS MUST BE REMOVED ALONG WITH THE LATCHING HARDWARE FOR THIS SUB BOX TO FIT.

USE OF THE REAR CUP HOLDERS WILL BE LOST.


Popular subs for this box. This is just a list of a few subs in no particular order that are commonly used.
If you know of another sub that you have used with good results you can email us to have it added to the list.
ALPINE Type S & Type R
Sundown LCS, E3 & SA series
JL Audio W0, W1 & W3 series
Punch P1, P2 & P3
Kicker CR, CVR & CVX

List Price: $300.00
Our Price: $250.00
You save $50.00!


Availability:: Usually Ships in 3 to 5 Business Days
Product Code: DQC-212-V


SPEAKER GRILLS:

TERMINAL CUP



CUP HOLDER KIT*:

choose a color

SUB SIZE*:


Qty:
Features
 
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 34 Write a review.


  0 of 0 people found the following review helpful:
 
4 of 5 Great box for the money October 10, 2019
Reviewer: David from Knoxville , TN United States  
I have a DD audio 4000.1 mono block amp, pushing 2 Alpine type-R 12’s. A mechman 370amp alternator, big 3 wiring upgrade, 0/1 gauge directly to the amp powered by a D3400 XS power battery.
The box sounds great, but it doesn’t last.
I have had serious trouble with the amount of power I’m pushing and the box being made out of 1/2” MDF. I have broken the heads off of #8 stainless wood screws that hold the subs to the box. I removed them all, and replaced them #10 stainless wood screws, and 3 days later broke the heads of 6 of those screws and upon removing the subs for the second time noticed that the ones that didn’t break the heads off, blew off large chunks of MDF around the screws.
My 3rd attempt to keep the subs anchored down was a combination of stainless anchors rated at 60lbs each and epoxy.
If anyone at Fox acoustics reads this, I would love it if you would offer to make this box out of 1” birch plywood. I would gladly pay whatever the cost difference would be.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 2012 dodge ram 2 12 vented. September 11, 2019
Reviewer: Raymond Fay from Chico, CA United States  
Hello, I'm writing to tell the guys at fox thanks for the box, it's awesome, I received the packages within one week of ordering, assembly was easy and I am running t1d212 fosgates in it. The t1 has to be put in sideways because the fuse terminal will rub a hole in the box. I decided after some trial and error to use a pound of polyfill in the box and everything sounds great, and the box is well made and very sturdy! It also looks very nice.  Great job guys! Thank you!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 A MUST! June 22, 2019
Reviewer: Chris Kyade from Beaufort, SC United States  
First off, this took me 2 weeks to get from order to delivery. Keep that in mind. I didn’t think I’d be able to get the sound I was looking for in a truck while still keeping the back seat. I had the sealed atrend box. It didn’t scratch my bass itch. A local radio shop owner told me about the fox box. I was skeptical to say the least but after YouTube videos and reviews, why not. You have to put it together exactly the way it’s suppose to be or it won’t fit(takes up all the space back there). After install, I was completely in shock. The sound this thing produces is unimaginable. Stop reading and waiting and just buy. You won’t regret it. Only box I’ll ever get for a truck is a fox box. My system is stupid loud considering I still have my back seat! Running 2 DD 600 series 10s.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Lost box June 21, 2019
Reviewer: Steve Copeland from Santa Rosa, NM United States  
Fedex stuck it to me and lost my box. Joe is making it right and has sent a second. Looking forward to it’s arrival and install.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Order this one. Don’t bother elsewhere. June 13, 2019
Reviewer: JW from Evansville, IN United States  
Running with 10” subs on 800 watts RMS. Tuning is a little lower than what’s listed for 12” subs. Spend your money once right here. Update. Installed a pair of Orion XTR 12d4. Perfect match for this enclosure. At 1200 watts rms they are stupid punchy.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

DODGE / RAM > QUAD CAB
DODGE / RAM > CREW CAB > 2002-2018 & "2019 CLASSIC"