FREE SHIPPING ON ORDERS OVER $100! Coupon code: FREE100 Coupon code MUST be applied at checkout. Make sure your total is correct before submitting your order. There is a 15% refund/cancelation fee, so make sure EVERYTHING is correct!!
FOX BOX
Regular price $299.00
Box looks and sounds great!
I went with a pair of Arc Audio A10s and they fit perfectly and sound really good in this box. Box is very well built, packaging was second to none, and it arrived quickly.
I did seal off the end speaker terminals and run wiring out the back to some XT60 inline connectors. But that is personal choice and wasn't necessary. The included terminals would work and once fully installed I realize how little wiring would have been seen if you run the wire up and toward the back, like at 10:00 or 2:00. Looks like the seat has room to tuck the wires in under there and you'd only see a few inched of them on the side. But side terminals are the only thing I would change, but I also understand why they didn't move them as part of the design There really isn't any other place to put terminals like that on the box without having the seats press on them.
I did have the auto stop/start power inverter under my seat. Although it is stated that this box would not work with it, I took a chance and it worked out fine. I was able to shift the inverter behind the box with a few strategic cuts to the carpeting. I never unplugged it to do so since I read elsewhere that unplugging could trigger a CEL, but I don't know that as a fact. When closing the seat it has to start out a little forward to get the seat past it's edge, but then push the box in behind it to seat it. Be aware of how the wiring is positioned and that it isn't getting pinched, but once in it holds tight.
The one picture shows how the box fits along the seat. This side is forced out maybe a half inch more than the other by the power inverter stuffed where I have it. I looked for a picture showing these angles before ordering but couldn't find anything, so here they are for others.
Front edge sticks past the seat about one finger width when installed. Both of my seats do fully lock down with some minor pressing, and the box seems to be locked down well by the seats. When sitting in the seats for testing I can't feel any hot spots of the enclosure. It's a really good design and maximizes the box cuft volume we can achieve under these seats.
I definitely would recommend this Fox Acoustics box and the company in general!
Love this box, (2) Rockford P3 Shallow.
I ordered the dual 10 sub box for my chevy colorado crew cab. The box not only fits perfectly and sounds amazing, but is built with exceptional quality. Shipping was quick and arrived fully protected about a week ahead of the expected date. Customer service has been on point. It's very safe to say Fox Acoustics is a brand I am VERY willing to recommend!!!
Thank you for the great review!
Love this box, sounds way better than previous generic box, and fits better as well. They shipped the same day I bought it.
2015+ CANYON /COLORADO DUAL 10"
Highly recommend. It’s taking my zv.6 like a champ surprisingly.
This is my 3rd box from Fox Acoustics. Best prefab boxes out there. Went with the recommended Sundown E powered by and Audio Control 1.800 and this thing is a beast. If you’re on the fence, go for it.
I had been looking for a box that fit under my rear seat for close to a year. I’d tried a few custom solutions and had been working on something similar to the elite in my fab shop when a friend asked about “fox acoustics” for his truck. I checked out the site and almost immediately selected the elite box. 1.9 cu.ft per sub? My fibreglass wouldn’t get that! I made a couple inquiries through the site as to fitment, finding out my Orion XTRPro 12.4 wouldn’t fit. I settled on a couple similar DB Drive 12s thinking that it was a magnet diameter issue.
Lo and behold the day the box arrived I could see what the problem was, and it wasn’t depth. The Orion mounts into a squarish opening and the Elite box had a round opening. Oh well I said to myself as I fit the new DB Drive WDX12G2.4 subs. And alas, it turns out these babies are slightly wider than the standard opening that is provided. Not to be deterred, I routered out the required area. While I was hacking and slashing the perfect finish that Fox shipped to me, I added ports for the speaker wire connections and flanged machine screw receptacles to hold the subs in with. The mounting face is triple thickness of the MDF so while I was fitting the box up with this hardware, I decided to open up the mounting face a little to see if my XTRPros might be squeezed in. This old man was giddy as a schoolgirl when the sub just popped right into place! A bit of adjustment to my plan was in order and it took a day or so to get everything cut and installed properly.
There is a required 2-1/2” lift to install the box under the rear seat, and all the hardware was provided along with instructions. Buyer beware, this decimated the headroom in the rear. The headrests on either side touch the ceiling so this won’t be good for an adults spine to sit in for a long time. To my dismay, these were the only instructions that arrived with the box. Luckily the minor assembly required to get the box together wasn’t too hard to figure out. Also to note: buyer will have to drill or port the wires for the subs as none are pre-installed.
Pictures show both the DB Drive subs installed, and the current Orion ones. Some information for the interested, my system has twin Orion XTRPRO12.4 wired to 1 ohlm and powered with an Orion XTR5500.1Dz with a birth cert just shy of 6000WRMS. This is going to be carved down to 3000WRM in the future as it is hard to find a good mount after the seat lift. The box tune of 34htz matches well with the subs and with some care these babies play tones to 20htz and below. The impact from the bass above 40htz can take your breath away! I haven’t shattered a window yet, but the year isn’t over. Good clean sound from the ports and no hints of chuffing issues at any frequency. Bass heads take note though, these are not “windy” ports. No hair tricks without modifications.
Although I prefer the Orion subs, the WDX ones perform excellent as well and I would expect any decent sub that plays around 1.5-2.0 cu. ft for optimal box size will be impressive in this enclosure.
Well done Fox! Two enthusiastic thumbs up!
Box is great quality. Fast shipping. Little vague on the instructions. Was missing 2 back seat brackets but called and they shipped them asap. Box fit nice and snug. Seat does sit pretty high. But anyone up to 6’ should be ok in back seat. Sound is amazing and even better than the older fox box that I replaced. Running 2 Rockford Fosgate T112D4 @ 1 ohm on a Rockford Fosgate
T1500BDCP Amp. Love it.
First I'll say Fox Acoustics is the ONLY company we use for prefab under seat boxes at our shop. If you want some BIG bass this is the box to buy. Well built and sounds amazing. We used 4 Audio Dynamics 3000 Series 3008D2 8's with an Audio Dynamics SD2000.1 and it was a perfect match. This thing GETS DOWN. We did make a jig to open the mounting holes to accommodate these particular subs.
I can finally mount my subwoofer box
Installation was super easy. Box was well made and electrical connectors were easy to connect.
We typically tell people that the U-15 is the largest we reommned for that sub box. I'm not sure if it will hold up long term to the abuse that sub can dish out.
This is my 3rd box from Fox Acoustics. Best prefab boxes out there. Went with the recommended Sundown E powered by and Audio Control 1.800 and this thing is a beast. If you’re on the fence, go for it.