FREE SHIPPING ON ORDERS OVER $100! Coupon code: FREE100 Coupon code MUST be applied at checkout. Make sure your total is correct before submitting your order. There is a 15% refund/cancelation fee, so make sure EVERYTHING is correct!!
FOX BOX
Regular price $450.00
sounds great and looks great
We have this in a 2024 Chevy 3500 and its loaded with (4) Digital Designs 608's and a 5k amp and she gets down
I like this box, I have 4 Skar ZVXV2 8 inch subwoofers I put in this box which sound great and hit good, using a Skar RP4500.1D amp wired to 2 ohms. I called Fox Acoustics Customer Support and they were extremely helpful, they were sadly unable to tell me if that box would be a perfect fit for those subwoofers but tried to help me as much as I can. The shipping was fast and box came undamaged. The only downside is that the durable coating applied to the box interfered with the subwoofers sizing only on the inner ring of the subwoofer hole. This resulted in me sanding down just the coating until it got to the bare wood. Once I did that, the subwoofers fit perfectly and even though the specified airspace on the box is smaller than what the subwoofer is rated for, the box still does a great job and the subwoofers hit hard as well as the box fitting great in the truck. I would recommend this box to anyone with the same truck as it was an amazing experience.
Arrived in very good condition as always my friend at fox acoustics came through for me they make great products. Stay safe Houma, La Thanks again M,Owens
Great quality great sound!!!! I am glad I ordered this box. Trust me you will not want to go anywhere else outside of fox acoustics
I had been looking for a box that fit under my rear seat for close to a year. I’d tried a few custom solutions and had been working on something similar to the elite in my fab shop when a friend asked about “fox acoustics” for his truck. I checked out the site and almost immediately selected the elite box. 1.9 cu.ft per sub? My fibreglass wouldn’t get that! I made a couple inquiries through the site as to fitment, finding out my Orion XTRPro 12.4 wouldn’t fit. I settled on a couple similar DB Drive 12s thinking that it was a magnet diameter issue.
Lo and behold the day the box arrived I could see what the problem was, and it wasn’t depth. The Orion mounts into a squarish opening and the Elite box had a round opening. Oh well I said to myself as I fit the new DB Drive WDX12G2.4 subs. And alas, it turns out these babies are slightly wider than the standard opening that is provided. Not to be deterred, I routered out the required area. While I was hacking and slashing the perfect finish that Fox shipped to me, I added ports for the speaker wire connections and flanged machine screw receptacles to hold the subs in with. The mounting face is triple thickness of the MDF so while I was fitting the box up with this hardware, I decided to open up the mounting face a little to see if my XTRPros might be squeezed in. This old man was giddy as a schoolgirl when the sub just popped right into place! A bit of adjustment to my plan was in order and it took a day or so to get everything cut and installed properly.
There is a required 2-1/2” lift to install the box under the rear seat, and all the hardware was provided along with instructions. Buyer beware, this decimated the headroom in the rear. The headrests on either side touch the ceiling so this won’t be good for an adults spine to sit in for a long time. To my dismay, these were the only instructions that arrived with the box. Luckily the minor assembly required to get the box together wasn’t too hard to figure out. Also to note: buyer will have to drill or port the wires for the subs as none are pre-installed.
Pictures show both the DB Drive subs installed, and the current Orion ones. Some information for the interested, my system has twin Orion XTRPRO12.4 wired to 1 ohlm and powered with an Orion XTR5500.1Dz with a birth cert just shy of 6000WRMS. This is going to be carved down to 3000WRM in the future as it is hard to find a good mount after the seat lift. The box tune of 34htz matches well with the subs and with some care these babies play tones to 20htz and below. The impact from the bass above 40htz can take your breath away! I haven’t shattered a window yet, but the year isn’t over. Good clean sound from the ports and no hints of chuffing issues at any frequency. Bass heads take note though, these are not “windy” ports. No hair tricks without modifications.
Although I prefer the Orion subs, the WDX ones perform excellent as well and I would expect any decent sub that plays around 1.5-2.0 cu. ft for optimal box size will be impressive in this enclosure.
Well done Fox! Two enthusiastic thumbs up!
Box is great quality. Fast shipping. Little vague on the instructions. Was missing 2 back seat brackets but called and they shipped them asap. Box fit nice and snug. Seat does sit pretty high. But anyone up to 6’ should be ok in back seat. Sound is amazing and even better than the older fox box that I replaced. Running 2 Rockford Fosgate T112D4 @ 1 ohm on a Rockford Fosgate
T1500BDCP Amp. Love it.
First I'll say Fox Acoustics is the ONLY company we use for prefab under seat boxes at our shop. If you want some BIG bass this is the box to buy. Well built and sounds amazing. We used 4 Audio Dynamics 3000 Series 3008D2 8's with an Audio Dynamics SD2000.1 and it was a perfect match. This thing GETS DOWN. We did make a jig to open the mounting holes to accommodate these particular subs.
Quality box , looks amazing and sounds amazing as well . This is my second purchase from fox acoustic, they have always had fast delivery with a quality product
I had a few questions, called and got an answer, then proceeded with the order. I ordered the box, subs, and recommended amp and this set up sounds amazing! They will definitely have a repeat customer.
I had been looking for a box that fit under my rear seat for close to a year. I’d tried a few custom solutions and had been working on something similar to the elite in my fab shop when a friend asked about “fox acoustics” for his truck. I checked out the site and almost immediately selected the elite box. 1.9 cu.ft per sub? My fibreglass wouldn’t get that! I made a couple inquiries through the site as to fitment, finding out my Orion XTRPro 12.4 wouldn’t fit. I settled on a couple similar DB Drive 12s thinking that it was a magnet diameter issue.
Lo and behold the day the box arrived I could see what the problem was, and it wasn’t depth. The Orion mounts into a squarish opening and the Elite box had a round opening. Oh well I said to myself as I fit the new DB Drive WDX12G2.4 subs. And alas, it turns out these babies are slightly wider than the standard opening that is provided. Not to be deterred, I routered out the required area. While I was hacking and slashing the perfect finish that Fox shipped to me, I added ports for the speaker wire connections and flanged machine screw receptacles to hold the subs in with. The mounting face is triple thickness of the MDF so while I was fitting the box up with this hardware, I decided to open up the mounting face a little to see if my XTRPros might be squeezed in. This old man was giddy as a schoolgirl when the sub just popped right into place! A bit of adjustment to my plan was in order and it took a day or so to get everything cut and installed properly.
There is a required 2-1/2” lift to install the box under the rear seat, and all the hardware was provided along with instructions. Buyer beware, this decimated the headroom in the rear. The headrests on either side touch the ceiling so this won’t be good for an adults spine to sit in for a long time. To my dismay, these were the only instructions that arrived with the box. Luckily the minor assembly required to get the box together wasn’t too hard to figure out. Also to note: buyer will have to drill or port the wires for the subs as none are pre-installed.
Pictures show both the DB Drive subs installed, and the current Orion ones. Some information for the interested, my system has twin Orion XTRPRO12.4 wired to 1 ohlm and powered with an Orion XTR5500.1Dz with a birth cert just shy of 6000WRMS. This is going to be carved down to 3000WRM in the future as it is hard to find a good mount after the seat lift. The box tune of 34htz matches well with the subs and with some care these babies play tones to 20htz and below. The impact from the bass above 40htz can take your breath away! I haven’t shattered a window yet, but the year isn’t over. Good clean sound from the ports and no hints of chuffing issues at any frequency. Bass heads take note though, these are not “windy” ports. No hair tricks without modifications.
Although I prefer the Orion subs, the WDX ones perform excellent as well and I would expect any decent sub that plays around 1.5-2.0 cu. ft for optimal box size will be impressive in this enclosure.
Well done Fox! Two enthusiastic thumbs up!
FORD F-150 2-10" FOR 2015+ SUPER CAB, 2009+ SUPER CREW, 2017+ SUPER DUTY CREW CAB
Box is great quality. Fast shipping. Little vague on the instructions. Was missing 2 back seat brackets but called and they shipped them asap. Box fit nice and snug. Seat does sit pretty high. But anyone up to 6’ should be ok in back seat. Sound is amazing and even better than the older fox box that I replaced. Running 2 Rockford Fosgate T112D4 @ 1 ohm on a Rockford Fosgate
T1500BDCP Amp. Love it.
Anyone that think shallow mounts can't get down, give them a try and they will change your mind
I decided to gift my boyfriend a box for his speakers because he works so hard and hardly ever asks for anything. His truck is his joy and I knew adding this would bring joy. Anyway, I couldn’t pick up the box from the store so I sent him and he had allllll good things to say about the staff. His words exactly were “they cool as fuck” lol! But they also helped refund me shipping cost super super easy and quick to communicate with. I have all great things to say about Fox Acoustics