- RMS 1000 watts
- Dual 2 or 4 ohm voice coils
- Vented magnetic gap
- Aluminum 2.75” voice coil former for superior heat dissipation
- Innovative high-velocity vented frame spacer ringLarge aluminum
- Faraday ring for smooth acoustic response
- Patented high-strength cast aluminum frame
- High-temperature voice coil wire
- Spring-loaded terminals
- Stitched-on double “XL” tinsel lead wires
This 12” SA v.2 is a top-down upgrade. The 2.75” coil punches way above its weight, outperforming most 3” coils without adding weight. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust double-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone and a strong foam surround were used to complete this masterpiece.
Specifications
T/S SPECS |
SAV2 12″ D2 |
SAV2 12″ D4 |
RE (Ohms) |
3.91 |
6.35 |
FS (Hz) |
38.8866 |
33.6039 |
VAS (L) |
26.2867 |
28.0603 |
Qes |
0.5070 |
0.4996 |
Qms |
4.5133 |
4.0178 |
Qts |
0.4558 |
0.4443 |
Le (mH) |
3.1785 |
4.6357 |
BL (NA) |
21.9903 |
29.3900 |
Mms (Grams) |
256.5545 |
321.8425 |
Cms (uM/N) |
65.2922 |
69.6976 |
Sens (dB @ 1w/1m) |
86.59 |
85.03 |
Enclosure Specifications
Sealed Enclosure |
1.0 cu ft |
Ported Enclosure |
1.75 cu ft |
Recommended Tuning |
35Hz |
Recommended Port Area |
26 sq in |
Displacement |
|
Depth |
7.35" |
Outside Diameter |
12.83″ |
Cut-Out |
11.01″ |