FREE SHIPPING ON ORDERS OVER $100! Coupon code: FREE100 Coupon code MUST be applied at checkout. Make sure your total is correct before submitting your order. There is a 15% refund/cancelation fee, so make sure EVERYTHING is correct!!
SUNDOWN
Regular price $149.99
DUAL 4 OHM VOICE COILS
Since their introduction in 2017 the Sundown LCS series woofers have been known for their impressive bass response and high levels of dependability. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – these are all aspects that we have taken to the next level in the Sundown LCS series. The refreshed v.2 update was released in 2020 and added an all new, custom tooled frame, push terminals, a rubber mounting gasket, and upgraded tinsel leads.
A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak). The large coil combined with gap venting, chamfered pole-piece design, and optimized pole vent give the LCS Series impressive thermal performance. Mechanical stability and durability are addressed via the strong paper cone, rugged foam surround, and a high quality spider with fully tied-on tinsel leads. All major areas of woofer durability have been addressed to the maximum level possible in this category.
Bottom-line; if you are looking for a great subwoofer option and you have a tight budget the Sundown LCS Series woofers are for you. These woofers have absolutely no frills – simply raw performance for the dollar.
I received my subwoofer box in my sundown, subwoofers they were in great condition and sound amazing
What a difference this box made with 2 JL Audio 10's. Sounds amazing and the seat kit is perfect!! I wish this box was available sooner, but glad I found it and ordered it. Shipping was fast and packaged very well!!
Been installing Joe's boxes in customer vehicles for many years now. (Lost count many moons ago!) His enclosures are second to none. The build quality is supurb, the finish is flawless and the fit is amazing! This is the case for all his enclosures, especially his vehicle specific options.
This is my first time actually being a customer of his and installing one of his enclosures in my own vehicle. The back wall of the 2016-2023 Tacoma is..... let's just say..... complex. Lots of mediocre, cheap and less than ideal options out there for this truck.
Enter: The Fox Acoustics 2-10" sealed enclosure option for this truck. All I will say is........ WOW!!!!!!!!!!!!!!!!!!
This enclosure fits PERFECT behind the rear seats. It is custom built around all of the back wall metal twists, turns and obstacles- including the power rear window motor and cables. It slides right in perfectly, with no need to remove the rear seats at all. The recessed woofer baffle eliminates any possibility of your drivers hitting the rear seats, even at full excursion, and the dual speaker terminal cups allow for effortless wire connections to your amplifier.
I loaded this box with a pair of good ol', tried and true, JL Audio 10WO - 4ohm drivers. Running 2ohm mono on a "nothing fancy" Pioneer Class D mono subwoofer amp...... let me tell you-
THIS. THING. ROCKS!!!!!!!!!!!!!!!!!!!!!!!!!!!
Fantastic frequency response- encompassing a full sub sweep from 120Hz all the way down to 35Hz. It's extremely impressive for its size, has ridiculous volume in the 80-40Hz range, with no major roll-off to be found. It sounds amazing on all types of music. It really gets down on the "Beat da Block" stuff (including Techmaster P.E.B.!!!). But it is also very musical. Just the right amount of punch on Rock/Country... and just a very smooth, and VERY present low-end response for normal listening.
I couldn't be happier with this box. It is JUST what I was looking for! Completely transformed my mobile audio listening experience! Fellow TACO audiophiles: You will NOT be disappointed with this enclosure! You do not need to look any further. Trust me when I say, this is the one for these trucks!!!!!
Thanks SO MUCH to Joe and the entire Fox Acoustics team for producing such a stellar sub enclosure option for us Yota Peeps!!!! Keep up the great work guys!!!!!!!!!!!!!!!!!!!!!!!!!
Installed with 2 Audio Control Spike 10s. Both fit without grille hitting my weather-tech floor mats. I decided to replace the center seat bolt as I wanted more thread contact (not required, just a personal decision). Worth the money and will buy another box from them in the future.
Great product, spoke on the phone with someone and she was very informative. Box arrived a day or so earlier than expected, The directions could use one change, to let us know that the seat can be reinstalled before the box goes in. Will definitely order again should the need arise
What a difference this box made with 2 JL Audio 10's. Sounds amazing and the seat kit is perfect!! I wish this box was available sooner, but glad I found it and ordered it. Shipping was fast and packaged very well!!
Been installing Joe's boxes in customer vehicles for many years now. (Lost count many moons ago!) His enclosures are second to none. The build quality is supurb, the finish is flawless and the fit is amazing! This is the case for all his enclosures, especially his vehicle specific options.
This is my first time actually being a customer of his and installing one of his enclosures in my own vehicle. The back wall of the 2016-2023 Tacoma is..... let's just say..... complex. Lots of mediocre, cheap and less than ideal options out there for this truck.
Enter: The Fox Acoustics 2-10" sealed enclosure option for this truck. All I will say is........ WOW!!!!!!!!!!!!!!!!!!
This enclosure fits PERFECT behind the rear seats. It is custom built around all of the back wall metal twists, turns and obstacles- including the power rear window motor and cables. It slides right in perfectly, with no need to remove the rear seats at all. The recessed woofer baffle eliminates any possibility of your drivers hitting the rear seats, even at full excursion, and the dual speaker terminal cups allow for effortless wire connections to your amplifier.
I loaded this box with a pair of good ol', tried and true, JL Audio 10WO - 4ohm drivers. Running 2ohm mono on a "nothing fancy" Pioneer Class D mono subwoofer amp...... let me tell you-
THIS. THING. ROCKS!!!!!!!!!!!!!!!!!!!!!!!!!!!
Fantastic frequency response- encompassing a full sub sweep from 120Hz all the way down to 35Hz. It's extremely impressive for its size, has ridiculous volume in the 80-40Hz range, with no major roll-off to be found. It sounds amazing on all types of music. It really gets down on the "Beat da Block" stuff (including Techmaster P.E.B.!!!). But it is also very musical. Just the right amount of punch on Rock/Country... and just a very smooth, and VERY present low-end response for normal listening.
I couldn't be happier with this box. It is JUST what I was looking for! Completely transformed my mobile audio listening experience! Fellow TACO audiophiles: You will NOT be disappointed with this enclosure! You do not need to look any further. Trust me when I say, this is the one for these trucks!!!!!
Thanks SO MUCH to Joe and the entire Fox Acoustics team for producing such a stellar sub enclosure option for us Yota Peeps!!!! Keep up the great work guys!!!!!!!!!!!!!!!!!!!!!!!!!
Installed with 2 Audio Control Spike 10s. Both fit without grille hitting my weather-tech floor mats. I decided to replace the center seat bolt as I wanted more thread contact (not required, just a personal decision). Worth the money and will buy another box from them in the future.
This sub box is awesome. I installed it in my 2018 Ram 3500 and paired it with a Sundown SA 12 Classic. Sounds absolutely perfect! Box is well constructed also. Worth every penny. This is my second truck I’ve put a fox box system in and they always sound great!
Super easy to install. Instructions were clear and simple. Took me less than an hour. I found that if I put a nut on the top bolt to hold it before tightening the bottom bolt it was much easier to tighten the bottom bolt the remove the nut from the top bolts before placing the seat back and fastening the top bolts